Smarty S03 Programmer by MADS Electronics 98.5-02 Dodge 5.9L Cummins (S03)

Vehicle Application:

• 1998.5 – 2002 Dodge Ram Pickup Trucks Cummins 5.9 L

Fast Guide to Smarty Tuner S03 Special Features:

• Catcher software’s inside
• Ten different performance levels
• Fastest download in the industry, up to three times faster than the competition, a typical ECM update takes less than 3 minutes
• ABS tire height updates in just few seconds
• Not traceable in the stock setting. Smarty leaves no footprint.
• Cold weather 3 cylinders High Idle is enable in all software’s
• Reads Diagnostic Trouble Codes in plain text
• No tools required, no fuses to pull
• USB built in for simple updates
• Free internet updates
• Most complete keyboard in the industry
• Reliable, it works off your OEM hardware
• Programmable Speed Limiter from 25 to 250 mph*
• Programmable parameters for fine tuning
• * In trucks of 2001 and 2002 the speed limiter is programmable in mph, older trucks have only a speed adjustment

1998.5 – 2002 Dodge Cummins 5.9 L – Fast guide to Smarty S-03 software levels:

• SW# 0: Half power
• SW # 1: Fuel Saver
• SW # 2: Only more fuel and Boost fooling
• SW # 3: Like # 2 + added timing
• SW # 4: “Soft” Catcher no added timing
• SW # 5: Like # 4 + added Timing
• SW # 6: Mild Catcher no added timing
• SW # 7: Like # 6 + added Timing
• SW # 8: Catcher no added timing
• SW # 9: Catcher with Timing

• Software number Zero – About half the power of a stock software. Use it whenever reduced power is desired or when you have to make sure that NO SMOKE is produced.
• Software number One – The Fuel Saver software. Mpg gains vary, in most cases a + 2 MPG has been reported. Please notice that the timing in this software is rather aggressive. HEAVY TOWING is not recommended with this software.
• Software number Two – This software increases the fuel delivered by the ECM and does the boost fooling.
• Software number Three – Same as software # 2 but timing has been added.
• Catcher software’s from number Four to number Nine – The even numbered software’s are identical to the odd numbered ones, except for the timing. The software’s without added timing are intended for use with timing adding boxes.
• The power gain at top RPM with these software’s is almost identical. These softwares differ greatly in HOW they get there. Then higher the software number then more aggressive the throttle response from idle speed up. Aggressive to the point that the software’s Eight and Nine can become difficult to handle on slippery roads. Please be very careful when you use these software’s for the first time! It takes some time to learn how to handle them.

Catcher Software:

• Catcher stands for Clutch and Traction Challenger
• It improves throttle response of the engine greatly. It spools up the turbo sooner. (On average 200 RPM sooner.) It deals with the injection timing. It alters the torque management.

CATCHER versions With and Without Added Timing:

• The software’s without added timing are useful if you want to use a timing box stacked with the Catcher.

Smarty S-03 VIN Lock:

• The Smarty Tuner S03 only works with one truck/ECM at one time. When you go back to stock a handheld Smarty unlocks from the VIN# and ECM. Now you are ready to go into another truck as many times as you want. The only limit is: ONE AT A TIME!
• The Smarty Tuner S03 needs to be plugged into the OBDII port of the truck to program or change levels but then can be unplugged.
• For customers that had a previous Smarty S03 Tuner on their truck and the Smarty S-03 was lost/broke/stolen, then yes you can purchase this new Smarty S-03 and program your truck without an issue