KILLER GRID HEATER UPGRADE KIT 07-24 DODGE/RAM 6.7L CUMMINS 2500/3500 3500/4500/5500 CAB & CHASSIS (1041520)
Regular Price $201.95
- Eliminates both problematic nuts found in the OE grid heater by fastening directly into the lower busbar
- Allows for full heat output with the stock intake grid heater
- Fully emissions compliant
- Easy installation with minor modification required for 2007-2012 applications (see note in About This Product section below)
- Kit includes replacement hardware and gaskets, along with special tools required for the job
- Self-locking threads built into the lower busbar which will prevent the connection from backing out and compromising electrical connection
The Killer Grid Heater Upgrade Kit is purpose-built to address a major flaw in the 6.7L Cummins engine that can result in total engine destruction. The problem lies in the electrical connection to the intake grid heater. When powering the grid heater, 200 amps pass through a small bolt and nut inside the intake and, over time, is known to deteriorate and eventually arc and break off. This nut drops into the engine, leading to extensive damage to the piston, head, and valves. Several solutions are currently on the market addressing this issue, but they are costly upgrades. They drastically reduce the heat available to the engine and typically require tuning, or they don’t work well in cold climates. This kit upgrades that flawed electrical circuit by eliminating the problematic bolts and nuts inside the intake while retaining the stock functionality of the heater, and it is cost-effective and easy to install.
INSTALL TIME
- 3 Hours
WARRANTY
Parts
- 12-Months
NOTE
- 2007-2012 applications require the use of a Dremel or hacksaw to remove an aluminum tab on grid heater (See installation manual for detailed instructions)
EMISSIONS
- This product does not require an EO in California. By nature of its design, it is legal for sale and use in all 50 states. Replacement parts included. (EMS:4)
Weight | 1 lbs |
---|---|
Dimensions | 26 × 7 × 2 in |
Related Products
-
ATIS46483B S464 T-4 BILLET 64MM Universal Turbo
Regular Price $1,250.00S464 T-4 BILLET 64MM Universal Turbo (ATIS46483B)
ATI offers a line of T-4 S400 turbos. We can also offer these turbos custom-built for your specifications. They are available with a cast or billet compressor wheel. All ATI turbos have heavy Duty 360 thrust bearings and the compressor inducer machined with a radius for optimum air flow. This is not a direct fit, but you will need an install kit for your application. Let us know if you need assistance with this.
Specifications:
*64mm Billet compressor
*83MM turbine wheel
*HD 360 degree thrust bearing
*Twin hydrodynamic journal bearings
*T4 twin scroll .90 A/R non-wastegated turbine housing
-
Valair Powerstroke Single Disc Ceramic/Kevlar Clutches (NMU70263-06)
Regular Price $853.481994 – 1997 7.3L 13″ x 1.25″ Performance Replacement
HD Spring Hub
Ceramic / Kevlar Buttons (Both sides of disc shown)
Rated @ 500HP / 1000 ft lbs Torque
3400# Pressure Plate
Kit includes:3400# Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing and Alignment Tool.
NOTE: Requires V2140 Flywheel -
Oil Pan Gasket (BICR5967OPG)
Regular Price $25.00BIG IRON Engine Oil Pan Gasket for 2003 – 2007 5.9L 6.7L Cummins Diesel Dodge Ram Pickup Truck
-
Valair Powerstroke Single Disc Organic Clutches (NMU70263)
Regular Price $324.161994 – 1997 7.3L 13″ x 1.25″ Stock Organic Replacement
Organic Facings
Rated @ Stock HP
3400# Pressure Plate
Kit includes: 3400# Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing and Alignment Tool.
NOTE: Requires V2140 Flywheel