The EAS Competition Kit gives users the ability to monitor EGTs and add an additional 0-100 PSIg boost and -40F to 300F temp sensors for ultimate control. This kit is designed for those truck owners who have upgraded turbo or turbos and other mods, where the stock sensors just aren’t enough anymore. This kit is ideal for trucks participating in dyno competitions, sled pulls, and drag racing.
The EAS EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it’s a must-have! Towing can put a lot of strain on the truck and make it run hot. Don’t be left on the side of the road with an overheated truck because you didn’t watch your Exhaust Gas Temperatures with the EAS EGT.
The EAS 0-100 PSIg Boost Sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. Simply install this sensor, use MyStyle to set up the sensor, and have the ability to see what kind of boost you can build. Or maybe you are trying to fine-tune your truck and need to install a drive pressure sensor or fuel pressure sensor the 0-100 PSIg sensor is your answer.
The EAS Temperature Sensor is a -40F to 300F 1/8 NPT sensor that will allow you to monitor things like Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Another great solution for those with aftermarket accessories.
98617 – EAS Competition Kit includes.
– EAS Starter Kit
– EAS EGT Probe
– EAS Universal 5 Volt
– EAS 0-100 PSIg Pressure Sensor
– EAS -40F to 300F Temperature Sensor
| Weight | 3 lbs |
|---|---|
| Dimensions | 10 × 10 × 10 in |
Related Products
-
Valair Powerstroke Single Disc Ceramic/Kevlar Clutch Kit (NMU70263-06-SFC)
Regular Price $1,062.091994 – 1997 7.3L 13″ x 1.25″ Performance Replacement
HD Spring Hub
Ceramic / Kevlar Buttons (Both sides of disc shown)
Rated @ 500HP / 1000 ft lbs Torque
3400# Pressure Plate
Kit includes: Solid Flywheel, 3400# Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing and Alignment Tool. -
OIL PAN BOLTS X32 (BICR5967OPB)
Regular Price $49.00BIG IRON Engine Oil Pan Bolts for 2003 – 2007 5.9L 6.7L Cummins Diesel Dodge Ram Pickup Truck. The bolts are the longer bolts as in the 6.7L OEM oil pan with the thicker reinforced lip.
We have also designed an oil pan with the reinforced lip for the 1994 – 2002 Dodge Cummins Truck. They are listed on our website and require these longer bolts. -
Valair Powerstroke Single Disc Ceramic Clutch Kit (NMU70263-04-SFC)
Regular Price $884.211994 – 1997 7.3L
NOT FOR TOWING
13″ x 1.25″ Performance Replacement
HD Spring Hub
Ceramic Button
Rated @ 600HP / 1100 ft lbs Torque
3400# Pressure Plate
Kit includes: Solid Flywheel, 3400# Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing and Alignment Tool. -
ATIS46483B S464 T-4 BILLET 64MM Universal Turbo
Regular Price $1,250.00S464 T-4 BILLET 64MM Universal Turbo (ATIS46483B)
ATI offers a line of T-4 S400 turbos. We can also offer these turbos custom-built for your specifications. They are available with a cast or billet compressor wheel. All ATI turbos have heavy Duty 360 thrust bearings and the compressor inducer machined with a radius for optimum air flow. This is not a direct fit, but you will need an install kit for your application. Let us know if you need assistance with this.
Specifications:
*64mm Billet compressor
*83MM turbine wheel
*HD 360 degree thrust bearing
*Twin hydrodynamic journal bearings
*T4 twin scroll .90 A/R non-wastegated turbine housing
