-
KILLER GRID HEATER UPGRADE KIT 07-24 DODGE/RAM 6.7L CUMMINS 2500/3500 3500/4500/5500 CAB & CHASSIS (1041520)
Regular Price $195.95Eliminates both problematic nuts found in the OE grid heater by fastening directly into the lower busbar Allows for full heat output with the stock intake grid heater Fully emissions compliant Easy installation with minor modification required for 2007-2012 applications (see note in About This Product section below) Kit includes replacement hardware and gaskets, along with special tools required for the job Self-locking threads built into the lower busbar which will prevent the connection from backing out and compromising electrical connection The Killer Grid Heater Upgrade Kit is purpose-built to address a major flaw in the 6.7L Cummins engine that…
-
New OEM Holset VGT Turbo Actuator Dodge Ram Cummins 6.7L 2007.5-2012
Regular Price $1,395.00New OEM Holset Cummins Actuator
This kit allows the use of the
*2013+ Newer style VGT actuator on models for:
*Dodge Ram 6.7L 2007.5-2012
*Installation kit included
*with wiring harness
*Calibration Required
-
OIL PAN BOLTS X32 (BICR5967OPB)
Regular Price $49.00BIG IRON Engine Oil Pan Bolts for 2003 – 2007 5.9L 6.7L Cummins Diesel Dodge Ram Pickup Truck. The bolts are the longer bolts as in the 6.7L OEM oil pan with the thicker reinforced lip.
We have also designed an oil pan with the reinforced lip for the 1994 – 2002 Dodge Cummins Truck. They are listed on our website and require these longer bolts. -
Oil Pan Gasket (BICR5967OPG)
Regular Price $25.00BIG IRON Engine Oil Pan Gasket for 2003 – 2007 5.9L 6.7L Cummins Diesel Dodge Ram Pickup Truck
-
S&B Cold Air Intake Kit 10-12 Dodge Ram 2500 3500 6.7L Cummins (75-5092)
Regular Price $349.00Maximum Performance Our cold air intake for the 2010-2012 Dodge Ram Cummins 6.7L was engineered to minimize air restriction and flows 51.68 percent better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. Silicone Filters and Couplers. Silicone is a premium rubber which will seal better and last longer. It handles as much as 400F without cracking or tearing. With a high friction surface and no oily residue, our Silicone Filters and Couplers won’t slide off the tube. Pull in More Cold AirThe secondary inlet lowers the restriction…
-
S&B Cold Air Intake Kit 10-12 Dodge Ram 2500 3500 6.7L Cummins (75-5092D)
Regular Price $349.00Maximum Performance Our cold air intake for the 2010-2012 Dodge Ram Cummins 6.7L was engineered to minimize air restriction and flows 51.68 percent better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. Silicone Filters and Couplers. Silicone is a premium rubber which will seal better and last longer. It handles as much as 400F without cracking or tearing. With a high friction surface and no oily residue, our Silicone Filters and Couplers won’t slide off the tube. Pull in More Cold AirThe secondary inlet lowers the restriction…
-
STAGE 1 TURBO FOR 07 – 18 6.7L CUMMINS (HE300VG-R0718-S1)
Regular Price $2,495.00HE351VE Stage 1 turbo with 60mm billet compressor Wheel & powder coated compressor cover For your 2007-2018 6.7L Cummins with new style actuator
-
STAGE 2 TURBO FOR 07-18 6.7L CUMMINS (HE300VG-R0718-S2)
Regular Price $2,695.00HE351VE Stage 2 turbo with 60mm Billet compressor wheel with custom machined CHRA exhaust passage For your 2007 – 2018 6.7L Cummins turbo with new style actuator
-
STAGE 3 TURBO FOR 07-18 6.7L CUMMINS (HE300VG-R0718-S3)
Regular Price $2,995.00HE351VE Stage 3 Turbo with a 63mm Billet compressor wheel & upgraded 67mm turbine & custom machined CHRA exhaust passage , fits 2007 – 2018 6.7L Cummins Turbo with new style actuator
-
T3 24V STEED SPEED ANGLED TURBO FLANGE MANIFOLD
Regular Price $700.00Shown here is T3 manifold with angled flange. The manifold comes complete with all gaskets and turbo mounting hardware.
-
T4 24V STEED SPEED ANGLED TURBO FLANGE MANIFOLD
Regular Price $700.00Shown here is T4 manifold with angled flange. The perfect choice for upgrading to a larger turbo for your truck. The manifold comes complete with all gaskets and turbo mounting hardware.
-
Valair Billet Flex Plate 07.5-18 6.7L Dodge/Ram Cummins (FP-68-B)
Regular Price $269.00The Valair Billet Flex Plate will replace the cracked or broken factory flex plate for your 2007.5 – 2018 Dodge / Ram 6.7L Diesel. This flex plate is SFI approved to handle high-power applications and features billet steel construction. Billet Construction SFI Approved Made for high HP applications
-
Valair Cummins Clutch Hydraulic (NMU70HYD-03)
Regular Price $338.34Heavy Duty Adjustable Hydraulic Master / Slave Replacement for 3nd Generation Trucks. 2003+
-
Valair Cummins Dual Disc Ceramic Clutch Kit (NMU70G56DDB)
Regular Price $1,637.422005.5 – 2018 6.7L Cummins
Add $300 for Iron Disc
SFI Approved
Dual Disc Kit – up to 800HP
Ceramic Buttons
Billet Steel Flywheel with Steel Insert and Floater plate
Pressure Plate Loads – 3200# – 3400# – 3600# – 3850#
Kit includes: New G56 Dual Disc Flywheel w/Steel Insert, Choice of Pressure Plate load, Ceramic Clutch Discs, Release Bearing, HD Pilot Bearing, Modified Clutch Fork, Bolt Kit, and Alignment Tool.
NOTE: Requires HD Hydraulic Kit NMU70HYD-03 -
Valair Cummins Dual Disc Ceramic Clutch Kit (NMU70G56DDSN)
Regular Price $1,397.662005.5 – 2018 6.7L Cummins
Not for Competion Use
Dual Disc Kit – up to 650HP
Ceramic Buttons
Nodular Iron Flywheel and Billet Floater plate
Pressure Plate Load – 3800#
Kit includes: New Nodular Sprung hub G56 Dual Disc Flywheel, 3800# Pressure Plate, Ceramic Clutch Discs, Release Bearing, HD Pilot Bearing, Modified Clutch Fork, Bolt Kit, and Alignment Tool.
NOTE: Includes HD Hydraulic Kit NMU70HYD-03 -
Valair Cummins Dual Disc Ceramic Clutch Kit (QG56DDSN)
Regular Price $1,631.582005.5 – 2018 6.7L Cummins
Not for Competion Use
Quiet Dual Disc Kit – up to 650HP
Ceramic Buttons
Nodular Iron Flywheel and Billet Floater plate
Pressure Plate Load – 3800#
Kit includes: New Nodular Sprung hub G56 Dual Disc Flywheel, 3800# Pressure Plate, Ceramic Clutch Discs, Release Bearing, HD Pilot Bearing, Modified Clutch Fork, Bolt Kit, and Alignment Tool.
NOTE: Includes HD Hydraulic Kit NMU70HYD-03
This Quiet version will eliminate the floater plate rattle when the clutch pedal is pressed in. It will not get rid of gear rollover noise. -
Valair Cummins Dual Disc Organic Clutch Kit (NMU70G56DDSN-ORG)
Regular Price $1,397.662005.5 – 2018 6.7L Cummins
Not for Competion Use
Towing Dual Disc
Not for Racing applications
Dual Disc Kit – up to 550HP
Organic Facings
Nodular Iron Flywheel and Billet Floater plate
Pressure Plate Load – 3800#
Kit includes: New Nodular Sprung hub G56 Dual Disc Flywheel, 3800# Pressure Plate, Organic Clutch Discs, Release Bearing, HD Pilot Bearing, Modified Clutch Fork, Bolt Kit, and Alignment Tool.
NOTE: Includes HD Hydraulic Kit NMU70HYD-03
If you have a Stock – 500HP truck and tow alot this is the only way to go. This clutch has a very smooth engagement. -
Valair Cummins Dual Disc Organic Clutch Kit (QG56DDSN-ORG)
Regular Price $1,631.582005.5 – 2018 6.7LCummins
Not for Competion Use
Towing Dual Disc
Not for Racing applications
Quiet Dual Disc Kit – up to 550HP
Organic Facings
Nodular Iron Flywheel and Billet Floater plate
Pressure Plate Load – 3800#
Kit includes: New Nodular Sprung hub G56 Dual Disc Flywheel, 3800# Pressure Plate, Organic Clutch Discs, Release Bearing, HD Pilot Bearing, Modified Clutch Fork, Bolt Kit, and Alignment Tool.
NOTE: Includes HD Hydraulic Kit NMU70HYD-03
This Quiet version will eliminate the floater plate rattle when the clutch pedal is pressed in. It will not get rid of gear rollover noise.
If you have a Stock – 500HP truck and tow alot this is the only way to go. This clutch has a very smooth engagement. -
Valair Cummins Flywheel (VG56)
Regular Price $284.40G56 6 Speed solid flywheel These are drilled to accept 13.00″ pressure plates only.
Used in our G56 Solid Flywheel Conversions.
NOTE: Only for trucks equipped with Mercedes G56 transmissions -
Valair Cummins Single Disc Ceramic /Kevlar Clutch Kit (NMU70G56-06)
Regular Price $1,374.272005.5 – 2018 6.7L Cummins 13.00″ x 1.375″ Performance Replacement
Kevlar / Ceramic Buttons
HD Spring Hub
Rated @ 500HP / 1000 ft lbs Torque
3400# Pressure Plate
Kit includes: New G56 Solid Flywheel, 3400# Pressure Plate, Clutch Disc, Release Bearing, HD Pilot Bearing, Bolt Kit, and Alignment Tool.
NOTE: Includes HD Hydraulic Kit NMU70HYD-03 -
Valair Cummins Single Disc Organic Clutch Kit (NMU70G56)
Regular Price $817.542005.5 – 2018 6.7L Cummins
This is not a performance clutch.
13.00″ x 1.375″ Stock Organic Replacement
Organic Facings
OEM Style Hub
Rated @ Stock HP
3400# Pressure Plate
Kit includes: New G56 Solid Flywheel, 3400# Pressure Plate, Clutch Disc, Release Bearing, HD Pilot Bearing, Bolt Kit, and Alignment Tool.
NOTE: Includes HD Hydraulic Kit NMU70HYD-03 -
Valair Cummins Single Disc Organic Clutch Kit (NMU70G56-01)
Regular Price $973.102005.5 – 2018 6.7L Cummins
This clutch will be more aggressive than stock.
13.00″ x 1.375″ Heavy Duty Organic Replacement
Premium Brass Woven Organic Facings
HD Spring Hub
Rated @ 400HP / 800 ft lbs Torque
3400# Pressure Plate
Kit includes: New G56 Solid Flywheel, 3400# Pressure Plate, Clutch Disc, Release Bearing, HD Pilot Bearing, Bolt Kit, and Alignment Tool.
NOTE: Includes HD Hydraulic Kit NMU70HYD-03 -
Valair Cummins Triple Disc Ceramic Clutch Kit (NMU70G56TRIPLE-NW)
Regular Price $2,333.332005.5 – 2018 6.7L Cummins
Street Triple
Non stocking item
Built to order12.00″ x 1.375″ Performance Replacement
Ceramic Button Disk Rated @ 1000 HP
3250# Pressure Plate
Kit includes: Nodular Flywheel, Floater Plates, 3250# Diaphram Pressure Plate, Clutch Disc, Release Bearing, Fork, 580Spacer, Pilot Bearing and Alignment Tool. -
Valair Cummins Triple Disc Sintered Iron Clutch Kit (NMU70G56TRIPLE-COMP)
Regular Price $2,777.782005.5 – 2018 6.7L Cummins
SFI Approved
Non stocking item
Built to order
10.5″ x 1.375″ Performance Replacement
Sintered Iron Disk
Rated @ 1500HP
Kit includes: Billet Flywheel, Floater Plates, Weighted Lever style Pressure Plate, Clutch Disc, Release Bearing, Fork, 580Spacer, Pilot Bearing and Alignment Tool.