-
S&B Cold Air Intake For 07-10 Chevrolet Silverado GMC Sierra V8-6.6L LMM Duramax (75-5091D)
Regular Price $349.00Maximum Performance Our cold air intake for the 2007-2010 Chevy / GMC Duramax 6.6L was engineered to minimize air restriction and flows 53.06 percent better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. Protect Your Engine. This kit comes with a massive, highly efficient air filter which results in better performance and protects your engine. This kit was designed to avoid check engine lights with its properly mapped Mass Air Flow Sensor. Multiple Air Inlets More air equals better performance. The Duramax LMM intake kit features two…
-
S&B Cold Air Intake Kit 07-09 Dodge Ram 2500 3500 4500 5500 6.7L Cummins (75-5093D)
Regular Price $349.00Maximum Performance Our cold air intake for the 2007-2009 Dodge Ram Cummins 6.7L was engineered to minimize air restriction and flows 37.06 percent better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. Protect Your Engine. This kit comes with a massive, highly efficient air filter which results in better performance and protects your engine. Million Mile Warranty – S&B Air Filters and Intake Kits purchased from Authorized dealers are backed by S&B’s Million Mile Limited Warranty. Only when used under the typical driving conditions and on vehicles…
-
S&B Cold Air Intake Kit 06-07 Chevrolet Silverado GMC Sierra V8-6.6L LLY-LBZ Duramax (75-5080D)
Regular Price $349.00Maximum Performance Our cold air intake for the 2006-2007 Chevy / GMC Duramax LLY-LBZ 6.6L was engineered to minimize air restriction and flows 50.15 percent better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. Protect Your Engine. This kit comes with a massive, highly efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media. Million Mile Warranty – S&B Air Filters and Intake Kits purchased from Authorized dealers are backed by S&B’s Million Mile Limited…
-
S&B Cold Air Intake Kit 04-05 Chevrolet Silverado GMC Sierra V8-6.6L LLY Duramax (75-5102D)
Regular Price $349.00Maximum Performance Our cold air intake for the 2004-2005 Chevy / GMC Duramax LLY 6.6L was engineered to minimize air restriction and flows 44.63 percent better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. Protect Your Engine. This kit comes with a massive, highly efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media. Million Mile Warranty – S&B Air Filters and Intake Kits purchased from Authorized dealers are backed by S&B’s Million Mile Limited…
-
S&B Cold Air Intake Kit 03-07 Dodge Ram 2500 3500 5.9L Cummins (75-5094D)
Regular Price $349.00Maximum Performance Our cold air intake for the 2003-2007 Dodge Ram Cummins 5.9L was engineered to minimize air restriction and flows 42 percent better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. Silicone Filters and Couplers. Silicone is a premium rubber which will seal better and last longer. It handles as much as 400F without cracking or tearing. With a high friction surface and no oily residue, our Silicone Filters and Couplers won’t slide off the tube. Pull in More Cold Air The secondary inlet lowers the…
-
S&B Cold Air Intake Kit 01-04 Chevrolet Silverado GMC Sierra V8-6.6L LB7 Duramax (75-5101D)
Regular Price $349.00Maximum Performance Our cold air intake for the 2001-2004 Chevy / GMC Duramax LB7 6.6L was engineered to minimize air restriction and flows 44.63 percent better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. Protect Your Engine. This kit comes with a massive, highly efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media. Million Mile Warranty – S&B Air Filters and Intake Kits purchased from Authorized dealers are backed by S&B’s Million Mile Limited…
-
S&B Cold Side Intercooler Pipe for 11-16 Ford F250 F350 V8-6.7L Powerstroke (83-1000)
Regular Price $299.00S&B’s 3.50 inch diameter polished aluminum intercooler CAC pipe is larger than stock and is less restrictive. Less restriction means more airflow, and more airflow equals better performance. Made with a stronger 5-PLY aramid reinforced silicone hose. Most importantly, this intercooler pipe replaces the failure prone OEM intercooler pipe that is known to burst and leave you stranded. Details: Fits 2011-16 Ford F250 / F350 V8-6.7L Powerstroke Engine Manufacturer Powerstroke Street Legal In All US States: Yes Fuel Type Diesel Liter 6.7 Liter Cylinder V8 Warranty Million Mile Warranty
-
S&B Cold Side Intercooler Pipe for 17-21 Ford F250 F350 V8-6.7L Powerstroke (83-1001)
Regular Price $299.00S&B’s 3.50 inch diameter polished aluminum intercooler CAC pipe is larger than stock and is less restrictive. Less restriction means more airflow, and more airflow equals better performance. Made with a stronger 5-PLY aramid reinforced silicone hose. Most importantly, this intercooler pipe replaces the failure prone OEM intercooler pipe that is known to burst and leave you stranded. Details: Fits 2017-21 Ford F250 / F350 V8-6.7L Powerstroke Engine Manufacturer Powerstroke Street Legal In All US States: Yes Fuel Type Diesel Liter 6.7 Liter Cylinder V8 Warranty Million Mile Warranty
-
S&b Silicone Body Mount Kit For 08-16 Ford F-250/F-350 Crew Cab Powerstroke 6.4L/6.7L (81-1003)
Regular Price $499.00Silicone Body Mount Kit For 08-16 Ford F-250/F-350 Powerstroke 6.4L/6.7L Crew Cab 8 Pc. Made From a Premium Silicone Rubber. These bushings offer great vibration isolation and will not crack or breakdown like the OEM foam or rubber bushings. Also comes with corrosion resistant coated steel cups and bolts. A Smooth Ride That Will Last a Lifetime. Stock body mounts deteriorate over time and cost a fortune. Urethane mounts are hard and squeak. S&B’s Silicone Body Mounts have a smooth stock ride and last the life of your truck. OEM Fit and Finish The cap bushings have a distinct boss…
-
Synergy Ram Steering Box Brace 94-02 Dodge Ram 4WD 1500/2500/3500 (8557-04)
Regular Price $230.00Synergy Dodge Steering Box Brace Designed to support the steering box sector shaft on 94-02 Dodge 4×4 solid front axle trucks Ties front frame horns together, helps eliminate steering box inchwander inch Tightens up steering feel and extends the life of your truck’s steering box Laser cut, CNC bent and precision welded using 1/4 inch Hot Rolled Steel plates, and 2.0X.120 inch thick square tubing Black Powdercoat finish for maximum corrosion resistance 100 percent Bolt On installation Fits: 94-01 Dodge Ram 1500 4×4 94-02 Dodge Ram 2500 4×4 94-02 Dodge Ram 3500 4×4
-
Mishimoto Intercooler Silver, fits Chevrolet/GMC 6.6L Duramax 2001-2005 (MMINT-DMAX-01SL)
Regular Price $1,147.00On sale price $825.00Mishimoto has expanded their Duramax performance parts line to include a performance intercooler for the 2001-2005 Chevrolet/GMC 6.6L Duramax. A high-performance diesel engine requires a cool, dense charge of air to reach its full power potential. Upgrade your factory intercooler to the Mishimoto all-aluminum intercooler engineered to maximize the efficiency of your Duramax. The Mishimoto Duramax intercooler is built to last, with heavy-duty cast aluminum end tanks and a bar-and-plate core, allowing for increased airflow and cooler intake temperatures. The Mishimoto Duramax intercooler features a significantly larger core than the factory unit and is designed to support substantial boost pressures…
-
Mishimoto Aluminum Radiator, fits Dodge 6.7L Cummins 2010-2012 (MMRAD-RAM-10)
Regular Price $925.00On sale price $650.00Looking to upgrade your 6.7L Cummins radiator? Mishimoto has developed a performance aluminum radiator for the Dodge 6.7L Cummins Engine as an ideal upgrade for the factory radiator. This Cummins performance radiator was designed and engineered to maximize cooling efficiency, boost engine functions, and protect your truck from overheating. Whether you use your Dodge Ram for daily driving or as a powerhouse for hauling and towing, you don’t want to overlook the importance of installing an upgraded aluminum radiator for your engine. A factory radiator cannot handle the heat that comes along with the immense power and torque potential of…
-
Mishimoto Intercooler Silver, fits Ford 6.0L Powerstroke 2003-2007 (MMINT-F2D-03SL)
Regular Price $1,310.00On sale price $945.00Mishimoto has released a performance intercooler for the 2003-2007 Ford 6.0L Powerstroke. A high-powered 6.0L engine needs an intercooler that can effectively reduce intake temperatures and withstand high pressures. The Mishimoto 6.0L Powerstroke intercooler is manufactured with heavy-duty cast aluminum end tanks and a stout bar-and-plate core, designed to decrease intake temperatures, improve airflow, and reduce pressure drop. By decreasing pressure drop this intercooler will extend the life of your turbocharger and improve the efficiency of your Powerstroke. The Mishimoto Powerstroke intercooler features a core with greater volume than the factory cooler; this results in numerous performance benefits including increased…
-
Mishimoto Intercooler Silver, fits Chevrolet/GMC 6.6L Duramax 2006-2010 (MMINT-DMAX-06SL)
Regular Price $1,180.00On sale price $850.00Mishimoto is expanding their line of Duramax performance parts to include a performance intercooler for the 2006-2010 Chevrolet/GMC 6.6L Duramax. High intake and exhaust gas temperatures can reduce performance and potentially cause engine damage. Protect your investment by upgrading to the Mishimoto 6.6L Duramax intercooler. This intercooler is precision engineered with durable cast aluminum end tanks and an efficient bar-and-plate core, all designed for improved airflow, lower intake temperatures, and improved EGTs. The Mishimoto Duramax intercooler will support substantial boost pressure in your stock or highly modified truck. The Mishimoto Duramax intercooler features a larger core volume and surface area…
-
Mishimoto Intercooler Kit Silver, fits Chevrolet/GMC 6.6L Duramax 2006-2010 (MMINT-DMAX-06KSL)
Regular Price $1,767.00On sale price $1,250.00Mishimoto is expanding their line of Duramax performance parts! Fed up with high EGTs and an intercooler setup that isn’t keeping up with the demands of your Duramax? The solution is finally here with the Mishimoto 2006-2010 Chevrolet/GMC 6.6L Duramax intercooler kit! This kit includes everything you need to improve airflow, substantially decrease air-charge temperatures, and support your truck at any power level. The Mishimoto intercooler piping is the first key component; our engineers have maximized airflow by eliminating restrictive bends, allowing for a smooth and unimpeded airflow. The piping is constructed of mandrel-bent aluminum polished to a flawless finish.…
-
AirDog FP-100-4G Air/Fuel Separation System Fuel Pump 2015-2016 Chevy Duramax (A4SPBC190)
Regular Price $693.00This is the AirDog I FP-100-4G fuel system for the 2015-2016 Chevy/GMC Duramax 6.6L. This diesel lift pump mounts to the frame jig in front of the fuel tank for a clean looking installation. This system utilizes the factory suction port in the fuel module for suction and plugs into the factory fuel line on the pressure side to supply fuel to the CP4 injection pump. The return is sent back to the tank through a filler neck tee. This is one of the easiest fuel systems to install. This is a 100GPH (Gallon Per Hour) lift pump system. Check…
-
FASS Titanium Signature Series Diesel Fuel System 100GPH GM Duramax 6.6L 2001-2010 (TSC10100G)
Regular Price $689.00FASS Fuel Systems Diesel System 2001-2010 GM Duramax 6.6L Titanium Signature Series 100GPH (TSC10100G) Part No: TSC10100G A FASS Fuel Systems can be a beneficial upgrade for your GM Duramax 6.6L diesel engine, this is because your Duramax doesn’t come with a factory System like other diesels. This requires your CP3 injection System to pull your fuel under a vacuum, adding additional stress to your CP3 System and risk introduce additional air into your fuel. This is where a Titanium FASS Fuel System comes in to help. The Titanium Signature Series diesel fuel System was engineered by FASS Fuel Systems to…
-
FASS Titanium Signature Series Diesel Fuel System 100GPH GM Duramax 6.6L 2011-2014 (TSC11100G)
Regular Price $689.00FASS Fuel Systems Diesel System 2011-2014 GM Duramax LML 6.6L Titanium Signature Series 100GPH (TSC11100G) Part No: TSC11100G A FASS Fuel Systems can be a beneficial upgrade for your GM Duramax LML diesel engine, this is because your Duramax doesn’t come with a factory System like other diesels. This requires your CP3 injection System to pull your fuel under a vacuum, adding additional stress to your CP3 System and risk introduce additional air into your fuel. This is where a Titanium FASS Fuel System comes in to help. The Titanium Signature Series diesel fuel System was engineered by FASS Fuel…
-
FASS Titanium Signature Series Diesel Fuel System 100GPH Dodge Cummins 5.9L 1998.5-2004 (TSD08100G)
Regular Price $669.00FASS Fuel Systems Diesel System 1998.5-2004 Dodge Ram Cummins Titanium Signature Series 100GPH (TSD08100G) Part No: TSD08100G NOTE: If the truck has been retrofitted with an in-tank System, you need to purchase a TSD07100G Kit. The Titanium Signature Series diesel fuel System was engineered by FASS Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration System in the diesel industry. Rated at 100 gallons per hour and backed by a limited lifetime warranty this Titanium Signature Series System is capable of supporting your Dodge Cummins 5.9L diesel engine with enough fuel for multiple fueling upgrades. A…
-
S&B Cold Air Intake Kit 03-07 Dodge Ram 2500 3500 5.9L Cummins (75-5094)
Regular Price $349.00Maximum Performance Our cold air intake for the 2003-2007 Dodge Ram Cummins 5.9L was engineered to minimize air restriction and flows 42 percent better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. Silicone Filters and Couplers. Silicone is a premium rubber which will seal better and last longer. It handles as much as 400F without cracking or tearing. With a high friction surface and no oily residue, our Silicone Filters and Couplers won’t slide off the tube. Pull in More Cold Air The secondary inlet lowers the…
-
192/215 Cam 89-18 Dodge/Ram Cummins (MTP192215)
Regular Price $599.00Installs with no Modification with proper valve protrusion. Works great for Street Performance Must check Piston to valve clearance Must use engine break in oil or zinc additive for the first 1,000 miles Liberally apply engine assembly lube to the entire camshaft before installation Application: 1989-2018 Dodge/Ram Cummins
-
184/215 Cam 89-18 Dodge/Ram Cummins (MTP184215)
Regular Price $599.00Installs with no Modification with proper valve protrusion. Works great for Towing and Performance Must use engine break in oil or zinc additive for the first 1,000 miles Liberally apply engine assembly lube to the entire camshaft before installation Application: 1989-2018 Dodge/Ram Cummins
-
Exhaust Tip 6 Inch O.D. Rolled End 5 Inch Inlet 18 Inch Length Silverline (TK6018SRB5)
Regular Price $65.67Want to give your exhaust system a show-car look? Silverline exhaust tips are the answer. They offer a wide variety of styles to create a custom look and sound Inlet Diameter (in.): 5.00 in. Tip Shape: Round Tip Outlet Size (in.): 6.00 Resonator: No Tip Installation: Clamp-on Tip Material: 304 stainless steel Tip Color: Polished Overall Length (in.): 18.00 in. Tip Cut: Slant Tip Edge Style: Rolled edge, single wall
-
Exhaust Tip 6 Inch O.D. Rolled End 4 Inch Inlet 18 Inch Length MBRP (T5130)
The exhaust tip is the crowning touch to your performance exhaust. It is your opportunity to really show off your personal style. Everybody has their own idea of style. The tips are universal fit so be sure to measure your tail pipes outside diameter and match it to the MBRP tip INLET diameter before ordering. T304 Stainless Steel Tip, 6 Inch OD Angled Rolled End, 4 Inch ID and 18 Inch Length Mirror Polished Finish High Quality Stainless Steel Universal Bolt-on Installation Clampless Design No Welding Required
-
Exhaust Tip 7 Inch O.D. Rolled End 5Inch Inlet 18 Inch Length MBRP (T5127)
Regular Price $149.99The exhaust tip is the crowning touch to your performance exhaust. It is your opportunity to really show off your personal style. Everybody has their own idea of style. The tips are universal fit so be sure to measure your tail pipes outside diameter and match it to the MBRP tip INLET diameter before ordering. T304 Stainless Steel Tip, 7 Inch OD Angle Cut Rolled End, 5 Inch ID and 18 Inch Length High Quality T304 Stainless Steel Mirror Polished Finish Universal Bolt-on Installation Clampless Design No Welding Required
-
Exhaust Tip 8 Inch O.D. Rolled End 5 Inch Inlet 18 Inch Length T304 Stainless Steel MBRP (T5129)
Regular Price $154.99The exhaust tip is the crowning touch to your performance exhaust. It is your opportunity to really show off your personal style. Everyone has their own idea of style. The tips are universal fit so be sure to measure your tail pipes outside diameter and match it to the MBRP tip INLET diameter before ordering. T304 Stainless Steel Tip, 8 Inch OD Angle Cut Rolled End, 5 Inch ID and 18 Inch Length Mirror Polished Finish High Quality Stainless Steel Universal Bolt-on Installation Clampless Design No Welding Required
-
AirDog FP-100-4G Air/Fuel Separation System Fuel Pump 04.5-18 Dodge/RAM Cummins (A4SPBD102)
Regular Price $693.00This is the AirDog I FP-100-4G fuel system for the 2004.5-2018 Dodge Ram with the Common Rail Cummins. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. A 1/2″ draw straw is used to pull fuel from the tank, Bypassing the factory fuel pump. The pressure side connects directly to the CP3 injection pump, bypassing the factory fuel filter housing. The AirDog Air/Vapor return is sent back to the tank through a filler neck tee. This is a 100GPH (Gallon Per Hour) lift pump system.
-
AirDog FP-100-4G Air/Fuel Separation System Fuel Pump 01-10 Chevy Duramax (A4SPBC185)
Regular Price $693.00This is the AirDog I FP-100-4G fuel system for the 2001-2010 Chevy/GMC Duramax 6.6L. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. This system utilizes the factory suction port in the fuel module for suction and plugs into the factory fuel line on the pressure side to supply fuel to the CP3 injection pump. The return is sent back to the tank through a filler neck tee. This is one of the easiest fuel systems to install. This is a 100GPH (Gallon Per Hour) lift pump system.
-
AirDog FP-100-4G Air/Fuel Separation System Fuel Pump 11-14 Chevy Duramax (A4SPBC186)
Regular Price $693.00This is the AirDog I FP-100-4G fuel system for the 2011-2014 Chevy/GMC Duramax 6.6L. This diesel lift pump mounts to the frame jig in front of the fuel tank for a clean looking installation. This system utilizes the factory suction port in the fuel module for suction and plugs into the factory fuel line on the pressure side to supply fuel to the CP4 injection pump. The return is sent back to the tank through a filler neck tee. This is one of the easiest fuel systems to install. This is a 100GPH (Gallon Per Hour) lift pump system.
-
AirDog II-5G, DF-165-5G Air/Fuel Separation System Fuel Pump 04.5-18 Dodge/RAM Cummins (A7SABD426)
Regular Price $816.00This is the AirDog II-5G DF-165-5G fuel system for the 2004.5-2018 Dodge Ram Common Rail Cummins. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. A Fuel Module Upgrade Kit is installed in the factory fuel basket to pull fuel through a factory-style 1/2″ bulkhead fitting. This will bypass the factory in-tank lift pump. The pressure side connects directly into the side of the injection pump, bypassing the factory fuel filter housing. The AirDog Air/Vapor return is sent back to the tank through the factory 3/8” suction line once the module is modified.…
Shop
